COE96 Precut Glass Angel Ornament Wafer Set
- Ships in 48 hours (Mon -Fri) except US Holidays
COE96 fusible Precut Glass Angel Ornament Wafer Set of 2
A fusible Glass Angel ornament "is" Christmas! We give you two unique Angel Precut Shapes in this set that you can customize up to 15 color combinations! Each Angel Wafer is designed to fit within a 3 inch diameter Ornament. The entire Angel is base colored in white and the entire front side and wings is layered with Sparkling White Mica Powder which is then covered in clear. The Halo topside is covered with Gold Mica and then clear glass powder The body is made so you customize the gown color or leave semi white. Chose the Gown color from either: Pink, Red or Chambray Blue and the Opal glass Powder color will be included with the Angel Wafer kit. (See Customizing Instructions below).
The Angel wing shapes have delicate precut open slots to allow light thru as well as the gown which reveals a swirling design with a small star. The intricate designs not only make them unique but perfrect for an Christmas Ornament design because they allow light to shine thru and outline the angel and the designs.
Included are two Angels in each set, each has a different wing set. Each wafer is made from Oceanside Compatiible glass powder white Opal frit, COE96.
Each is an ultra-light Glass Wafers is best fired in the kiln at a tack fuse but can be fully fused as well. (see recommend reading below)
COLORS: Choices of Spectrum Compatible powders
Base is Opal White glass powder: F1-200-96
Optional Angel Gown color Choices:
Opal Blue Chambray glass powder frit: F1-079-F
Opal Pink glass powder frit: 96922-FRIT-1
Opal Red glass powder frit: F1-2502-F
Quantity: 2 Precut Glass Angel Shapes
Dimensions: 2 1/2 W x 3 inches H (63.50 mm x 76.2 mm)
Customizing Instructions: To change the color of the Angel gown only, lay paper over the wings and face, spray the gown with a little liquid hair spray or apply fusing adhesive, then sift the powder color you choose, over the dress and allow to dry before moving and placing on the base glass to be kiln firied to at least a tack fuse. At only 1 mm thick the Angel wafer color will be more of a semi translucent even though opal powders are used to make them. You can increase the opacity by spraying liquid hairspray on the back and then sifting more white opal glass powder over the entire angel. Allow to dry before placing the back onto they glass base. You can also further customize the Angelsby cutting them with a pair of scissors.
Glass Manufacturer: Spectrum Glass Frit Powders by Oceanside Compatible
Glass Thickness: 1mm
Recommended Reading: What is a COE 96 Precut Glass Wafer?
(Includes Kiln Firing Schedule for Glass Wafers)
Accessory Glass Precut Shapes: Made in the USA