COE96 Precut Glass Wafer Christmas Ornament Finial Shape

COE96 Precut Glass Wafer Christmas Ornament Finial Shape Set of 2

This Precut Finial Shape Set is 3 3/4 L x 2 1/4 W the Figilgree is a Cranberry Transparent to place over a White Opal base treated with a sparkling white Mica Powder.  So the gitter will peak thru the beatutiful cranberry color.  To top off the christmas ornament is wafer shaped cap made in opal Pewter powder and then a layer of Silver Mica has been applied to add even more elegance.

We have included a fusible wire for hanging.

Suggestions for assembly:

1. Lay a base of clear COE 96 powder. Place the white base on the powder, place the fusible wite at the top, then lay the cranberry filigree on top and then the cap over all of these layers.  Finally cover the entire stack with a layer of clear powder and follow the firing schedule in the Recommended Reading below.

2. Fire on to a piece of clear glass.  You would follow the instructions in 1., above, but you would not need the glass powder base.

Each wafer is made from Oceanside Compatiible glass powders frits in COE96.

Glass Wafers are ultra light, can be cut with scissor and is best fired in the kiln at a tack fuse but can be fully fused as well.  (see recommend reading below)

COLORS: Choices of Spectrum Compatible powders

Transparent Cranberry powder frit COE 96 compatible
Base is Opal White glass powder frit: F1-200-96

Quantity: 2 Precut Glass Wafer Finial Shapes

Dimensions: 2 1/4 W x 3 3/4 inches H (57 mm x 95 mm)

Glass Manufacturer: Spectrum Glass Frit Powders by Oceanside Compatible
Glass Thickness: 1mm

Recommended Reading: What is a COE 96 Precut Glass Wafer?
(Includes Kiln Firing Schedule for Glass Wafers)

Accessory Glass Precut Shapes: Made in the USA