COE96 Precut Glass Wafer Christmas Ornament Teardrop Shape
- Ships in 48 hours (Mon -Fri) except US Holidays
COE96 Precut Glass Wafer Christmas Ornament Teardrop Shape 2 Part
This Precut Teardrop Shape is just under 3 inches and will fit perfect on a 3 inch clear precut 3mm Circle available as an optional base layer. The Teardrop ornament is two stacked layers. The top layer is White opal powder coated with white Mica and the base is light blue transparent powder. The snowflake filigree patternn allow light to shine thru transprent blue to make the snowflakes look blue. The cap on the ornament is made using Pewter Powder frit and then coated with a Silver custom mica mix just to add a little more elegance.
We have included a fusible wire for hanging.
Suggestion for assembly:
Center the Teardrop layers over a 3 inch clear cirlce, optional. Cover it with a layer of clear powder. Place the fusible wire at the top between the wafer and the clear base before layering the clear powder. Then follow the firing schedule in the Recommended Reading below.
Each wafer is made from Oceanside Compatiible glass powders frits in COE96.
Glass Wafers are ultra light, can be cut with scissor and is best fired in the kiln at a tack fuse but can be fully fused as well. (see recommend reading below)
COLORS: Choices of Spectrum Compatible powders
Top Layer Opal White glass powder frit: F1-200-96
Base Layer Transpare Light Blue F1-132-F
Quantity: 2 Precut Glass Wafer Teardrop Shapes and an ornament cap wafer
Dimensions:3 W x 3 H inches (76 mm x 76 mm)
Glass Manufacturer: Spectrum Glass Frit Powders by Oceanside Compatible
Glass Thickness: 1mm
Recommended Reading: What is a COE 96 Precut Glass Wafer?
(Includes Kiln Firing Schedule for Glass Wafers)
Accessory Glass Precut Shapes: Made in the USA