Seasonal Slumping Mold - Snowy Christmas Tree Dish

Seasonal Slumping Mold - Snowy Christmas Tree Dish

This ceramic mold gives you a lot of creative freedom when fusing your glass. Use the indented areas to create visual interest like white for snow or light and darker shades of green before you add you sheet glass and fire. You could even add decorative pieces like pebbles for ornaments or to give the impression of lights.

Before you fill the mold try turning your mold over and tracing it onto your glass or a sheet of paper to use as pattern. 

Snowy Christmas Tree Dish Mold Dimensions:

10.75" x 7.25" x 0.50" Deep (27.3 x 18.42 x 1.27 cm)

USE:

1. We suggest elevating your mold at least a 1/2 inch off of the shelf for even heat distribution.
2. Smooth the mold surface with fine sandpaper so it accepts kiln wash uniformly.

TIP: When using to fire glass directly onto kiln shelf then we recommend the addition of use shelf paper on top of a primed kiln shelf like: 

Bullseye Thin Fire or Spectrum's Papyrus 

Try Primo Primer #41515 and applying it with a Haik Brush # 41601 
And using Ceramic Mold Cleaning Brush #41600 to remove spent primer after you are done firing.