--> 20% off All Christmas Items  Go to Deals-On Sale <-- Until 12-12-21 - FREE US SHIPPING on $60 Orders (NOT on Sheet Glass or Molds)

COE96 Precut Glass 3D Poinsettia Wafer Christmas Ornament Kit

(2 reviews) Write a Review
Ships in 48 hours (Mon -Fri) except US Holidays


COE96 Precut Glass 3D Poinsettia Wafer Christmas Ornament Kit

Finally a 3D Fusible Glass Poinsettia Christmas Ornament! The assembled Poinsettia fits into a 2 3/4 inch diameter. Perfect for your ornament! The Wafer Kit includes 3 different sized Poinsettia flower petals that are each a different shade of red and a set of 4 green petals to form the base layer of glass. We created a custom glass opal powder toner mix for each petal size. Then when you stack the petals from largest to smallest, alternating petal positions, you will end up with a realistic look poinsettia flower. All you have to do is add the final layer by dropping the medium grain of yellow opal frit onto the center to represent the cyanthia; the small clusters of yellow blooms in the open center of the red floral bracts.

The Glass Wafers are ultra light, will give you vivid color and all without adding weight to your fused glass design. Cut them with scissor to change the shape or make it fit your design. We think of them as Glass Candy! Once you try them you can not get enough! Even when the layers are stacked, they will not create a bump like a normal 3 mm glass accessory precut. BUT, It is very important to red the Recommended Reading link below. No need to fully fuse when a tack fuse will give you beautiful results! The most important thing is the slow ramp up to burn off all the glass adhesives.  

Recomendation: Full fuse and get the shape you want for your base layer of glass, then apply your glass wafer in a second tack fulse or to the slumping process for the best color density.

COLORS: All are in Opal shades, Red, Yellow and dark Green

Quantity: 1 Kit: 3 petal shapes and 1 leaf shape and a small packette of yellow medium frit

Completed Dimensions: will fit within a 2 3/4 inch diameter. (69 mm)

Glass Manufacturer: Spectrum Glass Frit Powders by Oceanside Compatible
Some Frits have been blended.

Opal Black glass powder frit: F1-56-96
Opal Red glass powder frit: F1-2502-F
Opal Dark Green glass powder frit: F1-220-76SF
Opal Yellow glass medium frit: F3-2602-96

Glass Thickness: 1mm

Recommended ReadingWhat is a COE 96 Precut Glass Wafer?
(Includes Kiln Firing Schedule for Glass Wafers)

Accessory Glass Precut Shapes: Made in the USA


View AllClose

2 Reviews

  • 5
    Poinsettia ornament

    Posted by Unknown on 1st Sep 2017

    This is just the right size for a tree ornament. I plan to us it with copper foil and solder. I decided on pre cut glass to save time.

  • 3

    Posted by marlene on 30th Nov 2016

    At full fuse the poinsettia loses its sharp edges, so it was disappointing. Hi Marlene, all Precuts are designed for tack fusing except for Jewelry Circle, Ovals, etc. We suggest you look at our Free Project under Education to help you improve and obtain firing schedules. Sara, Customer Service

View AllClose