COE96 Precut Glass 3D Santa Boot Wafer Christmas Ornament
- Ships in 48 hours (Mon -Fri) except US Holidays
COE96 Precut Fusible Glass Santa Boot Wafer Christmas Ornament
Another 3D fusible Glass Wafer Shape, Santa's Boot! The boot fits in a 3 inch diameter, great for making a Christmas Ornament! There is plenty of detail in this glass accessory! The base is a red opal boot with a black boot strap that goes thru the brass buckle. The buckles is coated in a Brass Mica and both the strap and buckle have been layered in a clear to keep their colors contained and when fired add a great shine! Then to add more dimension there are two white layers of fur across the top of the boot and a hint of Christmas with a small bowel of holly in adventurine green.ble.
Santa Boot Precut Wafer Kit Includes:
- 1 Boot Base with attached Fur top
- 1 Boot Fur encase in white
- 1 Black Boot Strap with a Brass Buckle
- 1 small Bowel of Holly
Recomendation: Full fuse and get the shape you want for your base layer of glass, then apply your glass wafer in a second tack fulse or to the slumping process for the best color density. If you wish to reduce the skrinkage, cover in clear powder or fine glass frit. Always ramp very slowly to allow the layers of adhesive to burn off and leave the powder frit layers behind.
COLORS: All are in Opal shades, Aventurine Green, Black, Red, and White
Dimensions: 3 inch High and Wide (75 mm diameter)
Glass Manufacturer: Spectrum Glass Frit Powders by Oceanside Compatible
Some Frits have been blended.
Aventurine Green Powder F1-128-AV-SF
Black Opal powder frit: F1-56-96
Opal Red glass powder frit: F1-2502-F
White glass powder: F1-200-96
Glass Thickness: 1mm
Recommended Reading: What is a COE 96 Precut Glass Wafer?
(Includes Kiln Firing Schedule for Glass Wafers)
Accessory Glass Precut Shapes: Made in the USA