COE96 Precut Glass Candy Cane Wafer Christmas Ornament Set
- Ships in 48 hours (Mon -Fri) except US Holidays
COE96 Precut Glass 3D Poinsettia Wafer Christmas Ornament Kit
Two part Fusible Glass Candy Cane perfect for a Christmas Ornament at 3 1/2 inches long and include a fusible wire hanger! The traditional red and white cane, perpermint, is a set of two glass wafers. The Wafer Kit includes a base white glass powder and a red opal with sliced out areas to allow the white base cane to display. Notice the round open hanging loop. Place a small scrap of clear under this and sandwich the wire between the cane layers to provide a hanger. Just make sure a portion is outside of the glass.
The Candy Cande Glass Wafer is ultra light, will give you vivid color and all without adding weight to your fused glass design. Cut them with scissor to change the shape or ore remove the hanging circle. This wafer design is literally, Glass Candy!
When you stack the layers consider adding a third color using a stringer or noodle, snapped to 1/2 inch wide.
Recommended Reading link below. No need to fully fuse when a tack fuse will give you beautiful results! The most important thing is the slow ramp up to burn off all the glass adhesives.
Recomendation: Full fuse and get the shape you want for your base layer of glass, then apply your glass wafer in a second tack fulse or to the slumping process for the best color density.
COLORS: All are in Opal shades, Red, Yellow and dark Green
Quantity: 1 Kit: 2 Candy Cane shapes and 1 fusible wire loop
Completed Dimensions: 3 1/2 inch L x 1/2 inch W (8.89 cm x 1.27 cm)
Glass Manufacturer: Spectrum Glass Frit Powders by Oceanside Compatible
Some Frits have been blended.
Opal Red glass powder frit: F1-2502-F
Opal White glass powder frit: F1-200-SF
Glass Thickness: 1mm
Recommended Reading: What is a COE 96 Precut Glass Wafer?
(Includes Kiln Firing Schedule for Glass Wafers)
Accessory Glass Precut Shape: Made in the USA